Residential Preventative Maintenance/Heater
Cleaning $199.95 per year
A total tune-up will be performed once for
the duration of the Service Agreement during
regular business hours, as scheduled by
our office.
Our service technicians will perform these duties:
• Cleaning of the boiler, furnace flues, & baffles
• Replacement of the nozzle
• Clean and check the electrodes
• Clean and check the smoke pipe
• Cleaning the flues and baffles
• Perform a combustion test
• Ensure maximum working efficiency of the unit
• Install new oil filter cartridge
• Vacuum the unit & chimney base as needed
• Lubrication of motors, bearing, and pumps
• Inspect the condition of the combustion chamber

Residential Heater Maintenance/Service Contract
Agreement $289.95 per year
Emergency Service, 365 days per year, 24 hours a day.
This service includes a yearly cleaning and parts/labor
coverage on all included listed items below.
A total tune-up will be performed once for the duration
of the Service Agreement during regular business
hours, as scheduled by our office.
Our service technicians will perform these duties:
• Cleaning of the boiler, furnace flues, & baffles
• Replacement of the nozzle
• Clean and check the electrodes
• Clean and check the smoke pipe
• Cleaning the flues and baffles
• Perform a combustion test
• Ensure maximum working efficiency of the unit
• Install new oil filter cartridge
• Vacuum the unit & chimney base as needed
• Lubrication of motors, bearing, and pumps
• Inspect the condition of the combustion chamber
The replacement or repair of the following parts:
This contract does not cover:
Commercial units beyond the normal residential size,
plumbing or pipe work, e.g. low water cut offs, water
feed valves, expansion tanks, vent valves, manual valves,
zone valves, (power heads or bodies), bleeding of
radiators, water leaks, obsolete parts, hot water coils
or sheet metal repairs.
HEATER AGREEMENT PLANS AIR CONDITIONING TUNE-UP
• Blower motor
• Burner coupling
• Burner motor
• Blower pulley or belt
• Burner end cone
• Beckett air tube
• Cad cell eye
• Circulator motor
• Circulator coupling
• Electrode porcelains
• Fan limit controls
• Fuel pump screen
• Fill & vent cap
• Ignition transformer
• Nozzle
• Oil filter cartridge
• Primary control
• Single aquastat
• Standard thermostat

Terms of the Maintenance Agreement
Customer must be on automatic delivery.
• Service agreements are valid on an annual basis.
• It is the customer's responsibility to schedule a
maintenance appointment. In the event that this
is not performed prior to the contract termination
date, there is no pro-rating or extension of the
contract.
• This contract is subject to inspection and approval of
equipment.
• Any repairs required to make equipment in an
acceptable condition are excluded and will be
charged separately.
• It is the customer's responsibility to make the
heating system accessible for service.
• This contract does not cover acts of God, fire,
damage, power surges, frozen pipes, flooding or
other water damage, etc.
• This contract only covers normal wear and tear on
the equipment.
• X-press Energy will not be liable for service work
done by other companies.
• X-press Energy assumes no responsibility for
heating failure or damages when the house or
building is unoccupied.
• Work performed by anyone else during the
contracted period will void this contract.
• At the time of preventative maintenance
inspection, the low water cut-off on steam systems
will be flushed, but no responsibility will be assumed
for failure of this control. The air filters on warm air
units will also be checked.
• Periodic cleaning or replacement of air filters is the
responsibility of the owner.
• Repairs involving labor and parts not included in
this plan will be billed at our standard rate. Upon
request, we will notify the customer of the estimated
charges prior to making such repairs.
• Cancellation of the contract must be made in writing.
• If customer buys oil from another supplier, contract
may be voided.

Residential Air-Conditioning Tune-Up
$129.00 Check-up
Prepare for the season with our air
conditioning check and start special
The preventative maintenance and safety
check with our 12 point inspection
service as follows:
• Check condensing unit
• Clean outside coil
• Clean system voltage and wiring
• Check level of refrigerant in the system
• Check inside evaporator coil
• Check blower fan on inside unit
• Check air filtration filters
• Check PVC drain line piping
• Check condensate pump or drain
• Check thermostat
• Check inside air flow
• Check duct work/dampers
Replacement of parts or refrigerant
would be an additional charge as
necessary.